FIRE POLY FP75I

Class A INTERIOR FIRE RETARDANT
COATING / SPRAY
FOR ALL WOOD PRODUCTS
PLYWOOD ● LUMBER ● TIMBER ● OSB ● I-JOISTS

Carbon char after 30 minute ASTM E84 testFire Retardant for wood, plywood, lumber & timber ASTME84, Class A; UL723, Class I - actual photo demonstrates fireproofing capabilities
LABEL

ASTM E2768 (30 Minute) ASTM E84, Class A; UL723, Type1; NFPA 255; UBC 8-1
FIRE RETARDANT COATING
SURFACE BURNING CHARACTERISTICS OF APPLIED COATING

logo intertekW/N 21045
Surface
Wood
Flame spread
5
Smoke developed
60
Number of preliminary coats
1
Rate per coat (ft2/gal)
200-225

ICC - INTERTEK CERTIFICATE OF COMPLIANCE

fire retardant logo

FIRE POLY FP75I

TECHNICAL DATA

INTERIOR CLEAR FIRE RETARANT COATING CLASS A RATING

PRODUCT DESCRIPTION:    Aqueous Based Resin

PRODUCT ANALYSIS
Total Solids
46%   PH
2.5 - 2.8
Weight per gallon
13 lbs Flash point
Non-Flammable
Specific gravity
1.33 Color
Water clear at 78°F. - Slight haze at 50°F. or lower
Volatability
Non-Volatile Solvents
Water(Contains no petroleum or derivatives of petroleum)
Anti-Fungus
excellent Resistance Bacterial
Good Resistance
Linear shrinkage
None Moisture Absorption
None
Corrosive
Mildly Toxic
None (when dry)
Insects, rodents,
aspergilli And other types of molds
Excellent resistance Termites
Excellent resistance
Preservative for wood
None Scrubability
1000 cycles
Volatile Organic Compound - VOC

RECOMMENDED USE: Interior Class A Rating (Flame spread less than 25)

FLAME SAFE FIRE POLY 75I is a clear fire retardant coating. When applied in an interior application and according to Flame Safe's specifications, it is a permanent and effective fire retardant for the life of the structure provided it is not removed by extraordinary means or exposed to extreme moisture conditions. It can be used on

Yellow Pine Redwood Cedar Particle Board
Douglas Fir Plywood Walnut MDF / MDO / HDF
Mahoghany Cypress Poplar OSB
SPF Cherry Maple Cellulosic Materials
Oak Hemlock Paneling Wall Coverings

ENVIRONMENTAL REGULATION:

This product complies will U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.


QUICK REFERENCE FOR APPLYING FIRE POLY FP 75I CLEAR FIRE RETARDANT COATING

MATERIAL
APPLICATION
COVERAGE

Interior wood
Any type

Treat before, during or after construction.

Be sure surface is clean and dry before treating.

Apply with sprayer head held at 8 to 12 inches from surface

Apply with brush or roller.

May be necessary to wipe on hardwood surfaces

Treat all surface areas where possible

Do not expose treated area to moisture for 24 hours.

Apply 1 coat at 200 to 225 sq. ft. per gallon

 

INTERIOR WOOD

           All surfaces to be treated must be clean and dry. Fire Poly 75I fire retardant coating is water-based, clear liquid that becomes insoluble when dry. Fire Poly 75I fire retardant coatintg also acts as a mold and mildew protector and repels insects. If over coating is intended, Fire Poly 75I is an excellent surface primer for use under latex paints or can be use as a finished coat overwater based stains.

DO NOT DILUTE OR MIX FIRE POLY 75I WITH ANY OTHER PRODUCTS.

   Avoid wasteful runs and dripping.  It should be noted that unlike some products, materials treated with Fire Poly 75I fire retarant coating require no special cutting tools or special fasteners. Contact parts of any equipment should be stainless steel or plastic to prevent chemical reaction and breakdown. Storage may be done in polyethylene containers.

     Structures under construction can be made fire resistant. As soon as the surface is enclosed, spray all exposed interior surfaces (studs, trusses, subfloor, joists, interior of outside walls, etc. with Fire Poly FP 75I fire retardant coating, Use on substrates that are enclosed and/or in areas that are warm and dry. This will provide the structure with a long term fire retardant protection.

 

interior wood finishFire Retardant for interior wood

Interior Wood Finishes

clear fire retardantfor interior lumber, timber, plywood and other wood based productsClear fire retardant for interior lumber timber, plywood and other wood based products


Call for pricing and ordering 1-800-333-9197

HOME | CONTACTS | PRODUCTS |Fire Poly FP75I MSDS |TESTING