FIRE RETARDANT SPRAY
FIRE RETARDANT COATING AND TREATMENT

LABEL

 

TEST
Material tested
100% Cotton 100% Synthetic
RESULTS
CFR 1632.4
(FF 4-72)

FAR 25.853 a & b
CALIF 1237.1
NFPA 701
CAL TECH 117-F
NY-NJ PORT
BOSTON
Mattress Ticking
Mattress Pads
Upholstry
Textiles
Aircraft Interiors
Draperies
Wall Coverings
Cotton Muslin
Fabrics
Films

Class B

Passed
ClassA
Passed
Passed
Passed
Passed
 
ICC - Intertek CERTIFICATE OF COMPLIANCE
NFPA 701 Method 1
NFPA 701 Method 1ASTM D2859 synthetic carpet
NFPA 701 Method 2 ASTM D2859 Cotton-Jute carpet
ASTM E1353 Upholstered furniture (upholstery textiles)


FABRIC SAFE 2 exterior flame retardant spray penetrant for canvas and leather

 

FABRIC SAFE 2 TECHNICAL DATA

(Exterior / Interior)

PRODUCT DESCRIPTION:    Aqueous Based Resin

Product
Analysis
Total Solids
26.7 - 31.5%
PH
4.6 - 5.2
Weight per gallon
9.4 lbs
Flash point
Non-Flammable
Specific gravity
1.10
Color
Water clear at 78°F. - Slight haze at 50°F. or lower
Volatability
Non-Volatile
Solvents
Water(Contains no petroleum or derivatives of petroleum)
Anti-Fungus
Excellent Resistance
Bacterial
Good Resistance
Linear shrinkage
None
Moisture Absorption
None
Corrosive
Mildly
Toxic
None
Insects, rodents,
aspergilli And other types of molds
Excellent resistance
Not harmful to
plants

RECOMMENDED USE: Exterior / Interior

FLAME SAFE FABRIC SAFE 2 is a fire retardant that can be applied to materials such as:

Canvas Canvas awnings Canvas Tents
Burlap Leather (treat from the backside)


ENVIRONMENTAL REGULATION:

This product complies with U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.


QUICK REFERENCE FOR APPLYING FABRIC SAFE 2

MATERIAL APPLICATION COVERAGE
Canvas, Leather, Canvas tents, Canvas Awnings, Burlap Treat with retardant according to manufacturer's specifications

Apply with a mist applicator held 6" -8" from surface

Allow to dry befor use Treat both sides where possible

200 -300 sq. ft. per gallon

Do not saturate, retardant will easily penetrate material

EXTERIOR:

       Treatment of canvas tents and awnings with Fabric Safe 2 for canvas, gives excellent protection against ignition, flame spread and afterglow. It forms a barrier which inhibits ignition of the treated material and restricts the char to the immediate area touched exposed to flame. Fabric Safe 2 for canvas is a water-based, clear, odorless and non-toxic fire retardant. All surfaces to be treated must be clean. Due to the vast variety of tent materials, it is important to check for color fastness. This is done by applying a small amount of retardant to an obscure area and letting it dry ( a hair dryer will aid in drying). Apply retardant as it comes from the container. DO NOT DILUTE OR MIX FABRIC SAFE WITH ANY OTHER PRODUCTS. The coverage rate of Fabric Safe 2 is 200 to 300 square feet per gallon depending on the type and weight of the material being treated. All treated textiles/fabrics lose some of their fire retardant qualities after deep cleaning, therefore re-treatment with Fabric Safe 2 is necessary to achieve maximum results. Be sure all materials are dry before applying Fabric Safe 2 for canvas. A water based moisture sealer can be applied after applying Fabric Safe for canvas.

CAUTION:

           Product must not freeze. It MUST NOT be thinned or diluted.

OVERSPRAY:

         The overspray will not harm plants or animals. Spills can be flushed with water. A rag wetted with bleach and water mix will clean up spotting.

CLEAN UP PROCEDURE:

            1. Run bleach and water mix through spray mist applicator for cleaning any residue.

           2. Rinse sponges with bleach and water mix.

SAFETY FIRST: 

      If eye contact occurs, flood with water for fifteen (15) minutes and call a physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.